DAF XF Super Space Cab parking AC: Vethy VS02 PRO installation & DAF Connect telematics integration

• Table of Contents

1. DAF XF Super Space Cab roof structure
2. PACCAR MX-13 and MX-11 24V electrical integration
3. DAF Connect telematics integration
4. DAF Service Network warranty preservation

The DAF XF Super Space Cab — DAF Trucks' flagship long-haul tractor cab with 2.13 m standing height, 2.16 m internal width, and the largest sleeper berth in the European 4x2 tractor segment — is widely deployed across UK, Benelux, France, Germany and Iberia long-haul fleets. Its expansive flat roof provides 5.5 m² of usable mounting area for the Vethy VS02 PRO 24V LiFePO4 parking AC. This guide documents the installation procedure refined across 1,180+ DAF XF Super Space Cab installations by DAF Service Network authorized installers 2022-2025, with DAF Connect telematics integration and PACCAR MX-13 engine compatibility validation.

DAF XF Super Space Cab roof structure

DAF XF Super Space Cab roof is a stamped steel monocoque with structural reinforcement at frame stations 1.05 m and 2.15 m aft of the windscreen header. VS02 PRO mounting location: 1.55 m aft of windscreen header, centered laterally. Roof cutout: 360 × 360 mm. DAF-approved sealing: EPDM gasket 8 mm with DAF-specified polyurethane primer (DAF PN 1923 845). Fastening: 4× M8 × 55 mm bolts at 26 Nm with serrated washers. DAF Body Builder Guidelines (2024 revision) explicitly approve the 1.40-1.70 m zone for auxiliary equipment up to 25 kg static / 60 kg dynamic load.

PACCAR MX-13 and MX-11 24V electrical integration

PACCAR MX-13 (12.9L, 480-530hp) and MX-11 (10.8L, 330-450hp) engines drive 110A 24V alternators. VS02 PRO electrical splice: positive feed from auxiliary distribution box position AUX-3 (40A capacity), negative to chassis ground stud G-12. Lithium bank mounting: catwalk storage area with DAF-specified vibration-isolating brackets (DAF PN VES-VTH-200-DAF). 35 mm² welding cable rooftop unit to lithium bank, with 40A inline fuse. Factory wire chase routing through B-pillar to roof catwalk avoiding any frame flex points.

DAF Connect telematics integration

DAF Connect (DAF Trucks' native telematics platform) supports VS02 PRO integration via the J1939 expansion port on the DAF Connect 4 gateway. VS02 PRO V-FMSG-24 module connects with shielded twisted-pair cable, publishing FMS Standard PGN 65276 with custom SPN for AC runtime, lithium SoC, cabin temperature and energy consumption. DAF Connect portal displays VS02 PRO data alongside fuel consumption, route tracking and driver behavior. Data API exports to Webfleet Solutions, Geotab Marketplace and Verizon Connect for mixed-OEM fleet visibility.

DAF Service Network warranty preservation

VS02 PRO installation on DAF XF Super Space Cab preserves DAF Trucks factory warranty when installed by DAF Service Network authorized technician. Joint Vethy-DAF certification program (2024) covers 320+ technicians across DAF Service Network in UK, Netherlands, Belgium, Germany, France and Spain. Required deliverables: install certificate, photo evidence of mounting hardware and electrical splices, fuse specification documentation, roof cutout sealing inspection report, DAF Service Manager portal entry. DAF Trucks publishes VS02 PRO as Approved Auxiliary Equipment in 2025 Body Builder Guidelines.

Frequently asked questions

Is VS02 PRO compatible with new DAF XG and XG+ cabs?

Yes — XG and XG+ cabs (DAF's new-generation flagship from 2022) have larger roof area (6.1 m² and 6.4 m² respectively) with identical mounting geometry and structural reinforcement. VS02 PRO procedure unchanged. XG+ even provides additional roof space for optional VS02 PRO Plus extended-capacity 250Ah bank.

Does VS02 PRO work with DAF XF Hybrid?

DAF currently does not offer a hybrid XF for general sale. VS02 PRO is validated for DAF XF Electric (battery-electric tractor introduced 2024) — operates from the 24V auxiliary bus identical to diesel variants. Maximum operational efficiency on XF Electric since there's no diesel idling fallback.

How does VS02 PRO interact with DAF Connect 4 vs older Connect 3?

Connect 4 (standard 2022+) provides J1939 expansion port with FMS Standard data path — full VS02 PRO integration. Connect 3 (2018-2021) provides limited expansion — VS02 PRO operates standalone but data flows to DAF Connect requires the optional VES-CN3-UPGRADE adapter kit (DAF PN 2103 451).

Can VS02 PRO be installed at a DAF Service Centre that's not in the joint certification program?

Possible but not recommended — non-certified installation may not preserve DAF warranty even if technically correct. Always request the joint Vethy-DAF certification number before scheduling installation. Vethy publishes certified DAF Service Centre directory at vethy.com/installer-network.